Harbor Freight Tools Work Light 94668 User Manual

Owner’s Manual & Safety Instructions  
Save This Manual Keep this manual for the safety warnings and precautions, assembly,  
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the  
back of the manual near the assembly diagram (or month and year of purchase if product has no number).  
Keep this manual and the receipt in a safe and dry place for future reference.  
Email our technical support at: [email protected]  
REV 14h  
When unpacking, make sure that the product is intact  
and undamaged. If any parts are missing or broken,  
please call 1-888-866-5797 as soon as possible.  
©
®
Copyright 2006 by Harbor Freight Tools . All rights reserved.  
No portion of this manual or any artwork contained herein may be reproduced in  
any shape or form without the express written consent of Harbor Freight Tools.  
Diagrams within this manual may not be drawn proportionally. Due to continuing  
improvements, actual product may differ slightly from the product described herein.  
Tools required for assembly and service may not be included.  
Read this material before using this product.  
Failure to do so can result in serious injury.  
SAVE THIS MANUAL.  
 
12. Do not operate the Worklight in  
explosive atmospheres, such as in the  
presence of flammable liquids, gases,  
or dust. Electrical products create sparks  
which may ignite the dust or fumes.  
15. Warning: The warnings, cautions, and  
instructions discussed in this instruction  
manual cannot cover all possible  
conditions and situations that may occur.  
It must be understood by the operator that  
common sense and caution are factors  
which cannot be built into this product,  
but must be supplied by the operator.  
13. Do not submerge in water  
or any other liquid.  
14. WARNING: The cord of this product  
contains lead and/or di (2-ethylhexyl)  
phthalate (DEHP), chemicals known  
to the State of California to cause  
cancer, and birth defects or other  
reproductive harm. Wash hands  
after handling. (California Health &  
Safety Code § 25249.5, et seq.)  
Assembly  
1. Charge the Worklight before  
using it for the first time.  
5. To turn the Worklight on, press down  
on the On/Off Switch. To turn the  
Flashlight “OFF”, press down on the  
opposite end of the On/Off Switch.  
2. Plug the AC/DC Adapter into the  
Worklight at its base. Plug the AC/DC  
Adapter to a 120V electrical outlet.  
On/Off  
Switch  
Adapter  
Connection  
6. The Cigarette Adapter contains one  
250V, fast acting 3 Amp Fuse. To replace  
the Fuse, make certain the Adapter  
is unplugged. Open up the Cigarette  
Adapter, remove Fuse and insert  
3. Allow the Worklight to charge. Charging  
Indicator Light is the bottom LED bulb  
in center row. When Unit is charging,  
Charging Indicator Light will glow  
red. When Charging Indicator Light  
glows green, unit is fully charged.  
Disconnect the AC/DC Adapter.  
new one. Close Cigarette Adapter.  
7. The Worklight can be attached to metal  
work surfaces by placing its magnetic  
base against the metal portion of the  
work surface. The Worklight can also be  
hung by the Hanging Hook at its top. The  
Hanging Hook swivels 360 degrees.  
4. The Worklight also has a cigarette lighter  
adapter which can be plugged into a  
vehicle’s cigarette lighter. Allow Batteries  
to charge. Disconnect the Adapter.  
Item 94668  
For technical questions, please call 1-888-866-5797.  
 
Page 3  
Parts List  
Part  
Description  
Qty.  
Record Serial Number Here:  
1
2
3
4
5
AC/DC Adapter  
Cigarette Adapter  
1
1
1
1
2
Note: If product has no serial number,  
record month and year of purchase instead.  
Led Light  
Fuse 250 V, Fast Acting 3 Amp  
“S” Hanging Hook  
Note: Some parts are listed for illustration  
purposes only, and are not available  
individually as replacement parts.  
PLEASE READ THE FOLLOWING CAREFULLY  
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST IN THIS DOCUMENT  
AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY  
REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO  
MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS  
OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES  
THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND  
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY  
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS  
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.  
Limited 90 Day Warranty  
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,  
and warrants to the original purchaser that this product is free from defects in materials and workmanship for the  
period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly,  
to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper  
installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries  
to persons or property, or for incidental, contingent, special or consequential damages arising from the use of  
our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the  
above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER  
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.  
To take advantage of this warranty, the product or part must be returned to us with transportation charges  
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.  
If our inspection verifies the defect, we will either repair or replace the product at our election or we may  
elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will  
return repaired products at our expense, but if we determine there is no defect, or that the defect resulted  
from causes not within the scope of our warranty, then you must bear the cost of returning the product.  
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.  
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797  
 

Great States Network Card 204 14 User Manual
Grizzly Drill G0705 User Manual
H2O Audio Carrying Case D2 1C1 User Manual
Havis Shields Automobile Accessories C TM IMP User Manual
Hawking Technology Network Card HWUG1 User Manual
HP Hewlett Packard Computer Drive A3700 90905 User Manual
HP Hewlett Packard Server 633407 001 User Manual
IBM Computer Monitor 31P6240 User Manual
Impex Home Gym IGS 03 User Manual
i Tech Dynamic Headphones Clip S38 User Manual